Concrete Pumping With Truck Mounted Placing Boom Work Method Statement or Safe Work Procedure

The Safety Procedure includes:

• Site Awareness
• Suitable Location
• Boom Set-Up
• Delivery Pipeline Set-Up
• Pre-Start Daily Checks
• Concrete Delivery
• Pumping
• On Completion
• Risk Ratings

• 8 Page Complete Procedure
• MS Word Format
• This Is Not A Blank Template
• Version 4.0

General Concrete Pumping Safety Information:

The eight page Safe Work Method Statement outlines the Safety Steps required to operate a Concrete Pump with Truck Mounted Placing Boom Safely.

Concrete Pumping needs to be used with caution and appropiate safety procedures. The Concrete Pumping procedure is This Is Not A Blank Template and is not a blank template. Safety Procedures can be edited or customised in MS Word if required.

Concrete Pumping Safety Notes

When Concrete Pumping:

• Isolate the concrete truck and pump zone with fencing or other barriers.
• If working in the street, comply with local by-laws.
• Check all individual components for wear and possible damage.
• Check each vertical bend is fixed to stop movement of the bend.
• Pumping equipment must be in a mechanically sound condition

References:

New South - Wales WorkCover – Concrete Pumping – Code of practice 1994
Queensland – Department of Industrial Relations – Concrete Pumping – Code of Practice 2005
Victoria – Worksafe - Concrete Pumping Industry Standard – 2004
Victorian WorkCover -Concrete trucks reversing to discharge into a pump – Guidance Note 2005
Australian Standard 2550.15 - Cranes—Safe use - Concrete Placing equipment