V Cut Mitre Saw SOP 60012-2

The V Cut Mitre Saw Safe Operating Procedure (SOP)

The V Cut Mitre Saw  Safe Operating Procedure (SOP) outlines step-by-step processes for operating a V Cut Mitre Saw. A risk assessment form is also included in this pack. Keep this 2-page SOP close to your V Cut Mitre Saw so it can be easily accessed by operators.

The V Cut Mitre Saw Safe Operating Procedure SOP Content:

• Management Commitment and Approval
• PPE
• Hazards & Potential Outcomes
• Precautions
• Pre-Operational Inspection
• Operation Sequence
• Maintenance / Cleaning

V Cut Mitre Saw Safe Operating Procedure Extract Only

• DO NOT switch on the saw until you have checked that there is nothing in direct contact with the saw blade.

1. Adjust blade, gauges, settings and fence as relevant to the cut and depth of workpiece
2. Turn the saw ON
3.  Position workpiece
4.  Activate clamps
5.  Make the cut
6.  When the cut is made, turn the saw OFF
7. Wait for the blade to retract before removing the workpiece
• WARNING: Do not remove swarf from the blade by hand. Use a stick or brush.

• Regularly clean up around the work area and machine during the shift to reduce trip hazards. Store workpieces in a safe manner so it does not create additional hazards.

Ready to Use

Save time with our pre-filled, fully customisable templates. Simply add your company details and read the document to ensure all elements are relevant to your business, conduct a risk assessment using the Risk Assessment Form provided and make amendments as required. It is then ready for use as a training tool and as a point of discussion at OHS/WHS/Tool Box Talk meetings.